APC Smart-UPS RT 15kVA 230V International
Povrat robe moguć unutar 14 dana isključivo za fizičke osobe po odredbama na našim stranicama
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 15kVA on-line rack/tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire(1P+N+E) and 5-wire(3P+N+E) inputs, 3-wire(1P+N+E) and 5-wire(3P+N+E) outlets . The UPS has an embedded Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. The UPS is compatible with SRTGRK1 rail kit sold separately.
100 %
The main input voltage
is 380...415 V
230 B
The other input voltage
is 220...240 V
The main output voltage
is 380...415 V
230 V
Other Output voltage
230 V
Rated power [W]
15000 W
Rated power
15000 VA
Type of output connection
All-in-one five-wire (3P + N + E) 1
All-in-one three-wire (1P + N + E) 1
IDC connector three-wire (1P+ N+ E) 1
Number of Units
7U
Battery Type
Lead-acid battery
Pre-installed batteries
0
Free battery compartments
0
Typical recharge time
4 h
number of RBC™ cartridges
2
Battery voltage
+/- 192 V
Charger power (W)
2160 W rated
battery life
3…5 year(s)
The possibility of increasing the time of autonomy
1
Type of UPS
Topology double transformation
The number of unoccupied power modules
is 0
The number of slots occupied by power modules
is 0
reserve
No
Colour
Black (RAL 9005)
Height
30.6 cm
Width
44,0 cm
Depth
70,0 cm
Net weight
142,5 kg
Installation location
Front
Type of fastener
Lower
Installation execution
Rack-mounted
two-support mount 0
USB-compatible
Yes
Mounting position
Horizontal
Network frequency
40-70 Hz auto detection
Number of input connections
1 All-in-one five-wire (3P + N + E)
1 All-in-one three-wire (1P + N + E)
The limits of the input voltage
are 160...285 V full load
380 V
Maximum input current
66 A
Current switching capacity
100 A
Total harmonic distortion at the input
Less than 5% at full load
Input current
66 A (1 phase)
66 A (3 phases)
load power factor
From 0.9 leading to 1 lagging
Maximum set power (VA)
15000 VA
Maximum set power (W)
15000 W
Output frequency
50/60 Hz +/- 4 Hz synchronized with the power grid
Type of voltage form
Sinusoidal signal
Overload mode
60 s at 125% and 30 s at 150%
EFFICIENCY
94 %
Harmonic distortion
Less than 5 %
The Cross factor
3:1
bypass type
Internal bypass (automatic and manual)
Additional information
Choice of output three-phase voltage 380 : 400 or 415 V
