
PLANET mrežni VDSL2 pretvarač 10/100Mbps - 30a profile
Šifra proizvoda
O_VC-231Brand
PLANETModel
-Tip
-PartNo
4711213687242EAN
4711213687242Jamstvo
24Dostupnost
U dolasku
142,50 Eur
Povrat robe moguć unutar 14 dana isključivo za fizičke osobe po odredbama na našim stranicama
Key Features
- Cost
- Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base
- T, IEEE 802.3u, 100Base
- TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi
- Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- One RJ
- 11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- One 10/100Mbps RJ
- 45 port, Auto
- Negotiation and Auto
- MDI/MDI
- X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- VDSL2 stand
- alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug
- and
- Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis
- Co
- work with PLANET MC family Media Chassis (MC
- 700 / MC
- 1500/ MC
- 1500R)
- Compact in size, easy installation
Hardware Specification
- Ports:
* 10/100Base
- TX
- 1 RJ
- 45, Auto
- Negotiation and Auto
- MDI/MDI
- X
* VDSL
- 1 RJ
- 11, female Phone Jack
* PHONE
- Additional Splitter for POST connection
- DIP Switch & Functionality:
* 4 position DIP switch
* CO / CPE mode select
* Selectable fast and interleaved mode
* Selectable target 17a / 30a profiles
* Selectable target SNR mode
- Encoding:
* VDSL
- DMT (ITU
- T G.993.1 VDSL; ITU
- T G.997.1; ITU
- T G.993.2 VDSL2 (Profile 17a/30a Support))
- LED Indicators
* One Power
* 3 for RJ
- 11/VDSL2
* 2 for per RJ
- 45 10/100Base
- TX port
- Cabling:
* Ethernet: 10Base
- T: 2
- pair UTP Cat.3,4,5 up to 100m (328ft); 100Base
- TX: 2
- pair UTP Cat.5, up to 100m (328ft)
* VDSL: Twisted
- pair telephone wires (AWG24 or better) up to 1.4km
- Performance (Downstream / Upstream):
* 17a profile
300m
- > 86/65Mbps
400m
- > 86/52Mbps
600m
- > 81/36Mbps
800m
- > 72/19Mbps
1000m
- > 60/9Mbps
1200m
- > 59/6Mbps
1400m
- > 50/2Mbps
* 30a profile
300m
- > 100/100Mbps
400m
- > 90/90Mbps
600m
- > 61/40Mbps
800m
- > 54/8Mbps
- Power Requirement: 5V DC, 2A
- Power Consumption: 6.6 Watts / 22 BTU
- Dimension (W×D×H): 97×70×26 mm
- Weight: 199g
Environment
- Operating:
* Temperature: 0
- 50 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
- Storage:
* Temperature:
- 10
- 70 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
Switch Specification
- Switch Processing Scheme: Store
- and
- Forward
- Address Table: 1K entries
- Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
- Switch fabric: 0.2Gbps
- Throughput (packet per second): 0.14Mpps
- Network cables:
* 10/100Base
- TX: 2
- Pair UTP Cat. 3,4, 5 (100meters, max.); EIA / TIA
- 568 100
- ohm STP (100meters, max.)
Standard Conformance
- Regulation Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10Base
- T
* IEEE 802.3u 100Base
- TX
* ITU
- T: G.993.1 (VDSL); G.997.1; G.993.2 VDSL2 (Profile 17a/30a)
- Cost
- Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base
- T, IEEE 802.3u, 100Base
- TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi
- Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- One RJ
- 11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- One 10/100Mbps RJ
- 45 port, Auto
- Negotiation and Auto
- MDI/MDI
- X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- VDSL2 stand
- alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug
- and
- Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis
- Co
- work with PLANET MC family Media Chassis (MC
- 700 / MC
- 1500/ MC
- 1500R)
- Compact in size, easy installation
Hardware Specification
- Ports:
* 10/100Base
- TX
- 1 RJ
- 45, Auto
- Negotiation and Auto
- MDI/MDI
- X
* VDSL
- 1 RJ
- 11, female Phone Jack
* PHONE
- Additional Splitter for POST connection
- DIP Switch & Functionality:
* 4 position DIP switch
* CO / CPE mode select
* Selectable fast and interleaved mode
* Selectable target 17a / 30a profiles
* Selectable target SNR mode
- Encoding:
* VDSL
- DMT (ITU
- T G.993.1 VDSL; ITU
- T G.997.1; ITU
- T G.993.2 VDSL2 (Profile 17a/30a Support))
- LED Indicators
* One Power
* 3 for RJ
- 11/VDSL2
* 2 for per RJ
- 45 10/100Base
- TX port
- Cabling:
* Ethernet: 10Base
- T: 2
- pair UTP Cat.3,4,5 up to 100m (328ft); 100Base
- TX: 2
- pair UTP Cat.5, up to 100m (328ft)
* VDSL: Twisted
- pair telephone wires (AWG24 or better) up to 1.4km
- Performance (Downstream / Upstream):
* 17a profile
300m
- > 86/65Mbps
400m
- > 86/52Mbps
600m
- > 81/36Mbps
800m
- > 72/19Mbps
1000m
- > 60/9Mbps
1200m
- > 59/6Mbps
1400m
- > 50/2Mbps
* 30a profile
300m
- > 100/100Mbps
400m
- > 90/90Mbps
600m
- > 61/40Mbps
800m
- > 54/8Mbps
- Power Requirement: 5V DC, 2A
- Power Consumption: 6.6 Watts / 22 BTU
- Dimension (W×D×H): 97×70×26 mm
- Weight: 199g
Environment
- Operating:
* Temperature: 0
- 50 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
- Storage:
* Temperature:
- 10
- 70 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
Switch Specification
- Switch Processing Scheme: Store
- and
- Forward
- Address Table: 1K entries
- Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
- Switch fabric: 0.2Gbps
- Throughput (packet per second): 0.14Mpps
- Network cables:
* 10/100Base
- TX: 2
- Pair UTP Cat. 3,4, 5 (100meters, max.); EIA / TIA
- 568 100
- ohm STP (100meters, max.)
Standard Conformance
- Regulation Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10Base
- T
* IEEE 802.3u 100Base
- TX
* ITU
- T: G.993.1 (VDSL); G.997.1; G.993.2 VDSL2 (Profile 17a/30a)
Key Features
- Cost
- Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base
- T, IEEE 802.3u, 100Base
- TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi
- Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- One RJ
- 11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- One 10/100Mbps RJ
- 45 port, Auto
- Negotiation and Auto
- MDI/MDI
- X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- VDSL2 stand
- alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug
- and
- Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis
- Co
- work with PLANET MC family Media Chassis (MC
- 700 / MC
- 1500/ MC
- 1500R)
- Compact in size, easy installation
Hardware Specification
- Ports:
* 10/100Base
- TX
- 1 RJ
- 45, Auto
- Negotiation and Auto
- MDI/MDI
- X
* VDSL
- 1 RJ
- 11, female Phone Jack
* PHONE
- Additional Splitter for POST connection
- DIP Switch & Functionality:
* 4 position DIP switch
* CO / CPE mode select
* Selectable fast and interleaved mode
* Selectable target 17a / 30a profiles
* Selectable target SNR mode
- Encoding:
* VDSL
- DMT (ITU
- T G.993.1 VDSL; ITU
- T G.997.1; ITU
- T G.993.2 VDSL2 (Profile 17a/30a Support))
- LED Indicators
* One Power
* 3 for RJ
- 11/VDSL2
* 2 for per RJ
- 45 10/100Base
- TX port
- Cabling:
* Ethernet: 10Base
- T: 2
- pair UTP Cat.3,4,5 up to 100m (328ft); 100Base
- TX: 2
- pair UTP Cat.5, up to 100m (328ft)
* VDSL: Twisted
- pair telephone wires (AWG24 or better) up to 1.4km
- Performance (Downstream / Upstream):
* 17a profile
300m
- > 86/65Mbps
400m
- > 86/52Mbps
600m
- > 81/36Mbps
800m
- > 72/19Mbps
1000m
- > 60/9Mbps
1200m
- > 59/6Mbps
1400m
- > 50/2Mbps
* 30a profile
300m
- > 100/100Mbps
400m
- > 90/90Mbps
600m
- > 61/40Mbps
800m
- > 54/8Mbps
- Power Requirement: 5V DC, 2A
- Power Consumption: 6.6 Watts / 22 BTU
- Dimension (W×D×H): 97×70×26 mm
- Weight: 199g
Environment
- Operating:
* Temperature: 0
- 50 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
- Storage:
* Temperature:
- 10
- 70 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
Switch Specification
- Switch Processing Scheme: Store
- and
- Forward
- Address Table: 1K entries
- Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
- Switch fabric: 0.2Gbps
- Throughput (packet per second): 0.14Mpps
- Network cables:
* 10/100Base
- TX: 2
- Pair UTP Cat. 3,4, 5 (100meters, max.); EIA / TIA
- 568 100
- ohm STP (100meters, max.)
Standard Conformance
- Regulation Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10Base
- T
* IEEE 802.3u 100Base
- TX
* ITU
- T: G.993.1 (VDSL); G.997.1; G.993.2 VDSL2 (Profile 17a/30a)
- Cost
- Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base
- T, IEEE 802.3u, 100Base
- TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi
- Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- One RJ
- 11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- One 10/100Mbps RJ
- 45 port, Auto
- Negotiation and Auto
- MDI/MDI
- X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- VDSL2 stand
- alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug
- and
- Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis
- Co
- work with PLANET MC family Media Chassis (MC
- 700 / MC
- 1500/ MC
- 1500R)
- Compact in size, easy installation
Hardware Specification
- Ports:
* 10/100Base
- TX
- 1 RJ
- 45, Auto
- Negotiation and Auto
- MDI/MDI
- X
* VDSL
- 1 RJ
- 11, female Phone Jack
* PHONE
- Additional Splitter for POST connection
- DIP Switch & Functionality:
* 4 position DIP switch
* CO / CPE mode select
* Selectable fast and interleaved mode
* Selectable target 17a / 30a profiles
* Selectable target SNR mode
- Encoding:
* VDSL
- DMT (ITU
- T G.993.1 VDSL; ITU
- T G.997.1; ITU
- T G.993.2 VDSL2 (Profile 17a/30a Support))
- LED Indicators
* One Power
* 3 for RJ
- 11/VDSL2
* 2 for per RJ
- 45 10/100Base
- TX port
- Cabling:
* Ethernet: 10Base
- T: 2
- pair UTP Cat.3,4,5 up to 100m (328ft); 100Base
- TX: 2
- pair UTP Cat.5, up to 100m (328ft)
* VDSL: Twisted
- pair telephone wires (AWG24 or better) up to 1.4km
- Performance (Downstream / Upstream):
* 17a profile
300m
- > 86/65Mbps
400m
- > 86/52Mbps
600m
- > 81/36Mbps
800m
- > 72/19Mbps
1000m
- > 60/9Mbps
1200m
- > 59/6Mbps
1400m
- > 50/2Mbps
* 30a profile
300m
- > 100/100Mbps
400m
- > 90/90Mbps
600m
- > 61/40Mbps
800m
- > 54/8Mbps
- Power Requirement: 5V DC, 2A
- Power Consumption: 6.6 Watts / 22 BTU
- Dimension (W×D×H): 97×70×26 mm
- Weight: 199g
Environment
- Operating:
* Temperature: 0
- 50 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
- Storage:
* Temperature:
- 10
- 70 Degree C
* Relative Humidity: 10
- 90% (non
- condensing)
Switch Specification
- Switch Processing Scheme: Store
- and
- Forward
- Address Table: 1K entries
- Flow Control: Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
- Switch fabric: 0.2Gbps
- Throughput (packet per second): 0.14Mpps
- Network cables:
* 10/100Base
- TX: 2
- Pair UTP Cat. 3,4, 5 (100meters, max.); EIA / TIA
- 568 100
- ohm STP (100meters, max.)
Standard Conformance
- Regulation Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10Base
- T
* IEEE 802.3u 100Base
- TX
* ITU
- T: G.993.1 (VDSL); G.997.1; G.993.2 VDSL2 (Profile 17a/30a)
