
PLANET preklopnik (Switch) 10" 8-port 10/100TX 802.3at PoE + 2-port 10/100TX, rack-mountable
Šifra proizvoda
O_FSD-1008HPBrand
PLANETModel
-Tip
-PartNo
4711605283083EAN
4711605283083Jamstvo
24Dostupnost
Dobavljivo (2-4 dana)
65,25 Eur
Povrat robe moguć unutar 14 dana isključivo za fizičke osobe po odredbama na našim stranicama
Key Features
PHYSICAL PORT
- 10
- port 10/100BASE
- TX Fast Ethernet RJ45 copper
- 8
- port IEEE 802.3at PoE+ Injector (Port
- 1 to Port
- 8)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power+ over Ethernet end
- span PSE
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Each port supports 55V DC power to PoE powered device
- 120
- watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps auto
- negotiation and auto MDI/MDI
- X
- Flow control for full duplex operation and back pressure for half duplex operation
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30
- watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port
- 1 to Port
- 8)
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
HARDWARE
- 9
- inch desktop size, 1U height, rack mountable
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
- Fanless design
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware Specifications
- Copper Port: 10× 10/100BASE
- TX MDI/MDIX Ports
- PoE Injector Port: 8
- port with 802.3at/af PoE injector function with Port
- 1 to Port
- 8
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 2Gbps/non
- blocking
- Switch Throughput@64 bytes: 1.48Mpps@64 bytes
- MAC Address Table: 8K entries, automatic source address learning and aging
- Maximum Frame Size: 1522 bytes
- Flow Control:
* IEEE 802.3x pause frame for full
- duplex
* Back pressure for half
- duplex
- LED:
* System: Power (Green)
* 10/100BASE
- TX RJ45 interfaces: 10/100Mbps LNK/ACT (Green)
* PoE interfaces: PoE
- in
- Use (Orange)
- DIP Switch: Selectable operation mode (Standard, VLAN, Extend)
- Dimensions (W×D×H): 220×150×43 mm (1U height)
- Enclosure: Metal
- Weight: 1230 g
- Power Requirements: AC 100
- 240V, 50/60Hz, 2.5A max.
- Power Consumption/ Dissipation:
* System On: Max. 2.4 watts/8.1 BTU
* Ethernet Full Loading: Max. 5 watts/10.2 BTU
* PoE Full Loading: Max. 129 watts/440.1 BTU
- ESD Protection:
* Contact discharge of 4KV DC
* Air discharge of 6KV DC
- Thermal Fan: Fanless
Power over Ethernet
- PoE Standard:
* IEEE 802.3af Power over Ethernet/PSE
* IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End
- span
- PoE Power Output: Per port 55V DC, 540mA. max. 30 watts
- Power Pin Assignment: 1/2(+), 3/6(
- )
- PoE Power Budget: 120 watts
- Max. Number of Class 2 PDs: 8
- Max. Number of Class 3 PDs: 8
- Max. Number of Class 4 PDs: 4
Standards Conformance
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3x Flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
- Operating:
* Temperature: 0C
- 50 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
- Storage:
* Temperature:
- 10C
- 70 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
PHYSICAL PORT
- 10
- port 10/100BASE
- TX Fast Ethernet RJ45 copper
- 8
- port IEEE 802.3at PoE+ Injector (Port
- 1 to Port
- 8)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power+ over Ethernet end
- span PSE
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Each port supports 55V DC power to PoE powered device
- 120
- watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps auto
- negotiation and auto MDI/MDI
- X
- Flow control for full duplex operation and back pressure for half duplex operation
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30
- watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port
- 1 to Port
- 8)
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
HARDWARE
- 9
- inch desktop size, 1U height, rack mountable
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
- Fanless design
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware Specifications
- Copper Port: 10× 10/100BASE
- TX MDI/MDIX Ports
- PoE Injector Port: 8
- port with 802.3at/af PoE injector function with Port
- 1 to Port
- 8
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 2Gbps/non
- blocking
- Switch Throughput@64 bytes: 1.48Mpps@64 bytes
- MAC Address Table: 8K entries, automatic source address learning and aging
- Maximum Frame Size: 1522 bytes
- Flow Control:
* IEEE 802.3x pause frame for full
- duplex
* Back pressure for half
- duplex
- LED:
* System: Power (Green)
* 10/100BASE
- TX RJ45 interfaces: 10/100Mbps LNK/ACT (Green)
* PoE interfaces: PoE
- in
- Use (Orange)
- DIP Switch: Selectable operation mode (Standard, VLAN, Extend)
- Dimensions (W×D×H): 220×150×43 mm (1U height)
- Enclosure: Metal
- Weight: 1230 g
- Power Requirements: AC 100
- 240V, 50/60Hz, 2.5A max.
- Power Consumption/ Dissipation:
* System On: Max. 2.4 watts/8.1 BTU
* Ethernet Full Loading: Max. 5 watts/10.2 BTU
* PoE Full Loading: Max. 129 watts/440.1 BTU
- ESD Protection:
* Contact discharge of 4KV DC
* Air discharge of 6KV DC
- Thermal Fan: Fanless
Power over Ethernet
- PoE Standard:
* IEEE 802.3af Power over Ethernet/PSE
* IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End
- span
- PoE Power Output: Per port 55V DC, 540mA. max. 30 watts
- Power Pin Assignment: 1/2(+), 3/6(
- )
- PoE Power Budget: 120 watts
- Max. Number of Class 2 PDs: 8
- Max. Number of Class 3 PDs: 8
- Max. Number of Class 4 PDs: 4
Standards Conformance
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3x Flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
- Operating:
* Temperature: 0C
- 50 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
- Storage:
* Temperature:
- 10C
- 70 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
Key Features
PHYSICAL PORT
- 10
- port 10/100BASE
- TX Fast Ethernet RJ45 copper
- 8
- port IEEE 802.3at PoE+ Injector (Port
- 1 to Port
- 8)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power+ over Ethernet end
- span PSE
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Each port supports 55V DC power to PoE powered device
- 120
- watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps auto
- negotiation and auto MDI/MDI
- X
- Flow control for full duplex operation and back pressure for half duplex operation
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30
- watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port
- 1 to Port
- 8)
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
HARDWARE
- 9
- inch desktop size, 1U height, rack mountable
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
- Fanless design
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware Specifications
- Copper Port: 10× 10/100BASE
- TX MDI/MDIX Ports
- PoE Injector Port: 8
- port with 802.3at/af PoE injector function with Port
- 1 to Port
- 8
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 2Gbps/non
- blocking
- Switch Throughput@64 bytes: 1.48Mpps@64 bytes
- MAC Address Table: 8K entries, automatic source address learning and aging
- Maximum Frame Size: 1522 bytes
- Flow Control:
* IEEE 802.3x pause frame for full
- duplex
* Back pressure for half
- duplex
- LED:
* System: Power (Green)
* 10/100BASE
- TX RJ45 interfaces: 10/100Mbps LNK/ACT (Green)
* PoE interfaces: PoE
- in
- Use (Orange)
- DIP Switch: Selectable operation mode (Standard, VLAN, Extend)
- Dimensions (W×D×H): 220×150×43 mm (1U height)
- Enclosure: Metal
- Weight: 1230 g
- Power Requirements: AC 100
- 240V, 50/60Hz, 2.5A max.
- Power Consumption/ Dissipation:
* System On: Max. 2.4 watts/8.1 BTU
* Ethernet Full Loading: Max. 5 watts/10.2 BTU
* PoE Full Loading: Max. 129 watts/440.1 BTU
- ESD Protection:
* Contact discharge of 4KV DC
* Air discharge of 6KV DC
- Thermal Fan: Fanless
Power over Ethernet
- PoE Standard:
* IEEE 802.3af Power over Ethernet/PSE
* IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End
- span
- PoE Power Output: Per port 55V DC, 540mA. max. 30 watts
- Power Pin Assignment: 1/2(+), 3/6(
- )
- PoE Power Budget: 120 watts
- Max. Number of Class 2 PDs: 8
- Max. Number of Class 3 PDs: 8
- Max. Number of Class 4 PDs: 4
Standards Conformance
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3x Flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
- Operating:
* Temperature: 0C
- 50 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
- Storage:
* Temperature:
- 10C
- 70 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
PHYSICAL PORT
- 10
- port 10/100BASE
- TX Fast Ethernet RJ45 copper
- 8
- port IEEE 802.3at PoE+ Injector (Port
- 1 to Port
- 8)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power+ over Ethernet end
- span PSE
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30.8 watts for each PoE port
- Each port supports 55V DC power to PoE powered device
- 120
- watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps auto
- negotiation and auto MDI/MDI
- X
- Flow control for full duplex operation and back pressure for half duplex operation
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30
- watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port
- 1 to Port
- 8)
- Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
HARDWARE
- 9
- inch desktop size, 1U height, rack mountable
- LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
- Fanless design
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware Specifications
- Copper Port: 10× 10/100BASE
- TX MDI/MDIX Ports
- PoE Injector Port: 8
- port with 802.3at/af PoE injector function with Port
- 1 to Port
- 8
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 2Gbps/non
- blocking
- Switch Throughput@64 bytes: 1.48Mpps@64 bytes
- MAC Address Table: 8K entries, automatic source address learning and aging
- Maximum Frame Size: 1522 bytes
- Flow Control:
* IEEE 802.3x pause frame for full
- duplex
* Back pressure for half
- duplex
- LED:
* System: Power (Green)
* 10/100BASE
- TX RJ45 interfaces: 10/100Mbps LNK/ACT (Green)
* PoE interfaces: PoE
- in
- Use (Orange)
- DIP Switch: Selectable operation mode (Standard, VLAN, Extend)
- Dimensions (W×D×H): 220×150×43 mm (1U height)
- Enclosure: Metal
- Weight: 1230 g
- Power Requirements: AC 100
- 240V, 50/60Hz, 2.5A max.
- Power Consumption/ Dissipation:
* System On: Max. 2.4 watts/8.1 BTU
* Ethernet Full Loading: Max. 5 watts/10.2 BTU
* PoE Full Loading: Max. 129 watts/440.1 BTU
- ESD Protection:
* Contact discharge of 4KV DC
* Air discharge of 6KV DC
- Thermal Fan: Fanless
Power over Ethernet
- PoE Standard:
* IEEE 802.3af Power over Ethernet/PSE
* IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Power Supply Type: End
- span
- PoE Power Output: Per port 55V DC, 540mA. max. 30 watts
- Power Pin Assignment: 1/2(+), 3/6(
- )
- PoE Power Budget: 120 watts
- Max. Number of Class 2 PDs: 8
- Max. Number of Class 3 PDs: 8
- Max. Number of Class 4 PDs: 4
Standards Conformance
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3x Flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
- Operating:
* Temperature: 0C
- 50 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
- Storage:
* Temperature:
- 10C
- 70 degrees C
* Relative Humidity: 5%
- 95% (non
- condensing)
