
PLANET PoE preklopnik (Switch) 16-port 10/100Mbps + 2-porta 10/100/1000T + 1-port djeljivi 1000X SFP, rackmount kit
Šifra proizvoda
O_FGSD-1821PBrand
PLANETModel
-Tip
-PartNo
-EAN
-Jamstvo
24Dostupnost
U dolasku
124,00 Eur
Povrat robe moguć unutar 14 dana isključivo za fizičke osobe po odredbama na našim stranicama
- Cost
- optimized, Multi
- mode Ethernet Switch for PoE Networking
- Two Gigabit Uplink Ports
- Perfect Integrated Solution for PoE IP Surveillance
- Ethernet Data Transmission Distance Extension
- Powered Device Alive Check
- Flexible Extension Solution
Key Features
PHYSICAL PORT
- 16× 10/100BASE
- TX RJ45 ports with IEEE 802.3at PoE+ injector function (ports 1
- 16)
- 2× 10/100/1000BASE
- T Gigabit RJ45 ports interfaces (ports 17
- 18)
- 1× 1000BASE
- X SFP interface (port 17)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power over Ethernet Plus end
- span PSE
- Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1
- 16)
- Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W
- Each port supports 55 DC power to PoE powered device
- Auto detects powered device (PD)
- Supports PD alive function
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps and 10/100/1000Mbps auto
- negotiation and auto MDI/MDI
- X
- Supports IEEE802.3x flow control in full
- duplex mode and backpressure in half
- duplex mode
- Integrates address look
- up engine, supporting 16K absolute MAC addresses
- 16K jumbo frame supports 1000Mbps speed
- Hardware
- based DIP switch for Standard, VLAN or Extend mode selection
* VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP port 17
* Extend mode: Ports 1 to 8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other
- VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
- Automatic address learning and address aging
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
HARDWARE
- 11
- inch desktop size, 1U height
- LED indicators for system power, per port PoE ready and PoE activity, speed, link/act
- 1 silent fan to provide stable and efficient power performance
- Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection
- Supports ±6KV surge immunity
Specifications
HARDWARE
- Fast Ethernet Copper Ports: 16× 10/100BASE
- TX RJ45 auto
- MDI/MDI
- X ports
- Gigabit Ethernet Copper Ports: 2× 10/100/1000BASE
- T RJ45 auto
- MDI/MDI
- X ports (Port
- 17 shared with SFP port)
- SFP Ports: 1× 1000BASE
- SX/LX/BX SFP interface (shared with Port
- 17)
- DIP Switch: Selectable operation mode (Standard / VLAN / Extend)
- Dimensions (W×D×H): 280×180×44 mm (1U height)
- Enclosure: Metal
- Weight: 1800g
- Power Requirements: 100
- 240V AC, 50/60Hz, 5A max.
- Power Consumption/Dissipation: Max. 207 watts/706 BTU
- Thermal Fan: 1
- ESD Protection: Contact discharge of +/
- 6KV DC, Air discharge of +/
- 8KV DC
- Surge Protection: Differential Mode +/
- 4KV, Common Mode +/
- 6KV
- Installation: Desktop or rack
- mount installation
- LED Indicators:
* System: Power (Green), PoE Max. (Green)
- 10/100/1000T RJ45 Interfaces: 10/100/1000 LNK / ACT (Green), PoE
- in
- Use (Amber)
- 1000X SFP Interfaces: 1000 LNK / ACT (Green)
SWITCHING
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 7.2Gbps/non
- blocking
- Switch Throughput@64bytes: 5.36Mpps
- MAC Address Table: 16K entries
- Jumbo Frame: 16K bytes
- Flow Control: IEEE 802.3x pause frame for full duplex; back pressure for half duplex
POWER OVER ETHERNET
- PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Injector Ports: 16
- PoE Power Supply Type: End
- span: 1/2 (+), 3/6 (
- )
- PoE Power Output: Per port 55V DC, 600mA. max. 32 watts
- PoE Power Budget: 185 watts
- Number of PDs, 7 watts: 16
- Number of PDs, 15.4 watts: 12
- Number of PDs, 30 watts: 6
STANDARDS CONFORMANCE
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3ab Gigabit 1000BASE
- T
* IEEE 802.3z Gigabit SX/LX
* IEEE 802.3x flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy
- Efficient Ethernet
ENVIRONMENT
- Operating
* Temperature: 0C to 50C
* Relative Humidity: 5% to 95% (non
- condensing)
- Storage:
* Temperature:
- 10C to 70C
* Relative Humidity: 5% to 95% (non
- condensing)
- Cost
- optimized, Multi
- mode Ethernet Switch for PoE Networking
- Two Gigabit Uplink Ports
- Perfect Integrated Solution for PoE IP Surveillance
- Ethernet Data Transmission Distance Extension
- Powered Device Alive Check
- Flexible Extension Solution
Key Features
PHYSICAL PORT
- 16× 10/100BASE
- TX RJ45 ports with IEEE 802.3at PoE+ injector function (ports 1
- 16)
- 2× 10/100/1000BASE
- T Gigabit RJ45 ports interfaces (ports 17
- 18)
- 1× 1000BASE
- X SFP interface (port 17)
POWER OVER ETHERNET
- Complies with IEEE 802.3at Power over Ethernet Plus end
- span PSE
- Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1
- 16)
- Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W
- Each port supports 55 DC power to PoE powered device
- Auto detects powered device (PD)
- Supports PD alive function
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode with 250m in extend mode
SWITCHING
- Hardware
- based 10/100Mbps and 10/100/1000Mbps auto
- negotiation and auto MDI/MDI
- X
- Supports IEEE802.3x flow control in full
- duplex mode and backpressure in half
- duplex mode
- Integrates address look
- up engine, supporting 16K absolute MAC addresses
- 16K jumbo frame supports 1000Mbps speed
- Hardware
- based DIP switch for Standard, VLAN or Extend mode selection
* VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP port 17
* Extend mode: Ports 1 to 8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other
- VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
- Automatic address learning and address aging
- Supports Energy
- Efficient Ethernet (EEE) function (IEEE 802.3az)
HARDWARE
- 11
- inch desktop size, 1U height
- LED indicators for system power, per port PoE ready and PoE activity, speed, link/act
- 1 silent fan to provide stable and efficient power performance
- Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection
- Supports ±6KV surge immunity
Specifications
HARDWARE
- Fast Ethernet Copper Ports: 16× 10/100BASE
- TX RJ45 auto
- MDI/MDI
- X ports
- Gigabit Ethernet Copper Ports: 2× 10/100/1000BASE
- T RJ45 auto
- MDI/MDI
- X ports (Port
- 17 shared with SFP port)
- SFP Ports: 1× 1000BASE
- SX/LX/BX SFP interface (shared with Port
- 17)
- DIP Switch: Selectable operation mode (Standard / VLAN / Extend)
- Dimensions (W×D×H): 280×180×44 mm (1U height)
- Enclosure: Metal
- Weight: 1800g
- Power Requirements: 100
- 240V AC, 50/60Hz, 5A max.
- Power Consumption/Dissipation: Max. 207 watts/706 BTU
- Thermal Fan: 1
- ESD Protection: Contact discharge of +/
- 6KV DC, Air discharge of +/
- 8KV DC
- Surge Protection: Differential Mode +/
- 4KV, Common Mode +/
- 6KV
- Installation: Desktop or rack
- mount installation
- LED Indicators:
* System: Power (Green), PoE Max. (Green)
- 10/100/1000T RJ45 Interfaces: 10/100/1000 LNK / ACT (Green), PoE
- in
- Use (Amber)
- 1000X SFP Interfaces: 1000 LNK / ACT (Green)
SWITCHING
- Switch Architecture: Store
- and
- Forward
- Switch Fabric: 7.2Gbps/non
- blocking
- Switch Throughput@64bytes: 5.36Mpps
- MAC Address Table: 16K entries
- Jumbo Frame: 16K bytes
- Flow Control: IEEE 802.3x pause frame for full duplex; back pressure for half duplex
POWER OVER ETHERNET
- PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
- PoE Injector Ports: 16
- PoE Power Supply Type: End
- span: 1/2 (+), 3/6 (
- )
- PoE Power Output: Per port 55V DC, 600mA. max. 32 watts
- PoE Power Budget: 185 watts
- Number of PDs, 7 watts: 16
- Number of PDs, 15.4 watts: 12
- Number of PDs, 30 watts: 6
STANDARDS CONFORMANCE
- Regulatory Compliance: FCC Part 15 Class A, CE
- Standards Compliance:
* IEEE 802.3 10BASE
- T
* IEEE 802.3u 100BASE
- TX
* IEEE 802.3ab Gigabit 1000BASE
- T
* IEEE 802.3z Gigabit SX/LX
* IEEE 802.3x flow control and back pressure
* IEEE 802.3af Power over Ethernet
* IEEE 802.3at Power over Ethernet Plus
* IEEE 802.3az Energy
- Efficient Ethernet
ENVIRONMENT
- Operating
* Temperature: 0C to 50C
* Relative Humidity: 5% to 95% (non
- condensing)
- Storage:
* Temperature:
- 10C to 70C
* Relative Humidity: 5% to 95% (non
- condensing)
