Webasto (5111162D) SOD AC Next 22 kW s Type 2 kabelom od 7.0m, WLAN, bez postolja

Features

- Scalable charging power up to 22 kW

- Digital management of the charging stations via portal and app with the Webasto backend solution Webasto ChargeConnect

- Always online thanks to 24/7 real
- time transmission of the wallbox data to Webasto ChargeConnect

- Authentification at the charging station using Scan & Charge with the Webasto ChargeConnect App

- Energy management system (EMS) integration via Modbus TCP

- Local dynamic load management (stand
- alone)
* Automatically available from Q2 2022 through an over
- the
- air update

- Integrated meter module for energy consumption monitoring and reporting

- Clever product design with cable suspension and plug socket

- Cost savings for installation thanks to integrated DC residual current protection

- Remotely addressable by the grid operator via ripple control recei
- ver to ensure grid stability

- User friendly configuration using Wi
- Fi hotspot and

- Webasto Charger Setup App for installers

Technical specifications
ELECTRICAL CHARACHERISTIC

- Nominal current (configurable connected load values):
* 16A or 32A
* Single phase or 3
- phase
* The charging station is configurable in 1A steps

- Line voltage: 230/400V AC

- Grid frequency: 50 Hz

- Grid forms:
* TN / TT (single phase and 3
- phase)
* IT (only single phase)
* Splitphase (L1+L2, without N)

- EMV class:
* Emitted interference: Class B (residential, business, commercial areas)
* Immunity: Industrial areas

- Overvoltage category: III as per EN 60664

- Protection class: I

- Necessary protective equipment: Residual current circuit breaker RCD type A and miniature circuit breakers must be provided on the installation side

- Integrated protective equipment: DC residual current protection

- Phase rotation: Automatic false phase
- sequence detection

CONNECTIONS

- Mounting: Wall and pole mounting (permanently connected)

- Cable feed: Mounted on
- wall or in
- wall

- Connection cross
- section (wire dimension): Cross
- section of the connecting cable (Cu) taking into account the local conditions and norms: 6 or 10 mm2 for 16 A and 10 mm2 for 32 A

- Charging cable:
* Type 2 charging cable: up to 32 A / 400 VAC as per EN 62196
- 1 and EN 62196
- 2
* Length: 7 m
- Integrated cable suspension and plug socket

- Output voltage: 230 / 400V AC

- Max. charging capacity: 22 kW

COMMUNICATION & FEATURES

- Authentication:
* "Scan & Charge" via QR code
* Webasto ChargeConnect Portal
* Webasto ChargeConnect App

- Display: RGB
- LEDs, buzzer

- Network interfaces :
* LAN (RJ45)
- 10 / 100 Base
- TX
* WLAN 802.11b/g
- 54 Mbit/s
* WLAN Hotspot

- Communication protocols: OCPP 1.6 J (OCPP 2.0 ready), Modbus TCP

- External interfaces:
* Addressable via ripple control receiver through dry contacts
* Integration into Energy Management Systems (EMS)

- Local load management: Dynamic (stand
- alone) by integration of an external smart meter
* Automatically available from Q2 2022 through an over
- the
- air update

MECHANICAL DATA

- Dimensions (W×H×D): 225×447×116 mm

- Weight: 6.8 kg

- IP protection class, device: IP54

- Protection against mechanical impact: IK08

AMBIENT CONDITIONS

- Installation site: No direct solar radiation

- Operating temperature range:
- 30C to 45C

- Temperature behavior A reduction in charging current or shutdown may occur in order to prevent the charging station overheating

- Storage temperature range:
- 30C to +80C

- Permissible relative humidity: 5% to 95% non
- condensing

- Altitude: Max. 3.000m above sea level

CERTIFICATION COMPATIBILITY

- Standards and guidelines:
* CE conformity
* 2014/53/EU Radio Equipment Directive
* 2011/65/EU RoHS Directive
* 2001/95/EG General Product Safety
* 2012/19/EU Waste Electrical and Electronic Equipment Directive
* 1907/2006 REACH Regulation

- Backend integration: Webasto ChargeConnect, 3rd party backend integration via Weabasto ChargeConnect in preparation

- Tested compatible energymanagement systems (EMS): Integration into various energy management systems (EMS) in preparation