Magewell USB Capture AIO, USB3.0 BOX, 1-channel HDMI/DVI/VGA/YPbPr/S-Vid/CVBS/SDI, plus one unbalanced stereo audio, Plug and Play, Windows/Linux/Mac (32110)

SUPPORTED OS

- Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)

- Linux (support x86, x64 & ARM architecture)
* Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
* CentOS 6.5/7 (x86 & x64)
* Fedora 25/26/27 (x86 & x64)
* Red hat 6.5 and above (x86 & x64)
* Other Linux OS with kernel version 2.6.35 and above

- Mac:
* OS X 10.9/10.10/10.11
* macOS 10.12/10.13

- Chrome OS

RECOMMENDED OS (TESTED)

- Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)

- Linux:
* Ubuntu 12.04/14.04/16.04 (x86 & x64)
* Ubuntu 17.04/17.10 (x64)
* CentOS 6.5/7.2 (x86 & x64)
* Fedora 25/26 (x64)
* Red hat 6.5 (x86 & x64)

- Mac:
* OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
* macOS 10.12/10.13.2/10.13.3

SUPPORTED APIs

- Windows:
* DirectShow
* Wave API/DirectSound/WASAPI

- Linux:
* V4L2
* ALSA

- OS X/macOS:
* QuickTime
* AV Foundation

SUPPORTED SOFTWARE

- VLC

- VirtualDub

- OBS

- XSplit

- vMix

- VidBlaster

- Wirecast

- Microsoft Media Encoder

- Adobe Flash Media Encoder

- Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software

INPUT INTERFACES

- DVI
- I
* DVI 1.0
* HDMI 1.4a (via breakout cable)
* VGA (via DVI
- to
- VGA convertor)
* Component (via breakout cable)

- DB9
* YC (S
- Video)
* Composite video
* Analog audio (L+R)
* Component video

- BNC
* SD/HD/3G SDI

HOST INTERFACE

- USB 3.0
* compatible with USB 2.0
* compatible with USB 3.1 Gen 1

INPUT FEATURES

- Auto scan of video input sources when there is no signal input to the currently selected input source

- Manual selection of video input source

- Auto selection of linked (embedded) audio input source when the video input source changes

- Manual selection of audio input source

- Support for input video resolutions up to 2048×2160

VGA & COMPONENT SPECIFIC FEATURES

- 12
- bit ADC

- Support for RGB & YCbCr (YUV) color formats

- Support for "Separated sync", "Composite sync", "Sync
- on
- green" (SOG), "Sync
- on
- luminance" (SOY)

- Support for DMT, CEA, CVT, GTF video timings

- Input signals up to 165MHz pixel rate are digitized with 1:1 sampling

- Input signals over 165MHz pixel rate can be digitized with horizontal sub
- sampling (resulting in some image quality loss
- NOT recommended)

- Auto detection of RGB & YCbCr color formats

- Auto or manual sampling phase adjustment

- Auto horizontal alignment

- Support for customized video timings

- Support for customized video resolutions for CVT/GTF timings

HDMI SPECIFIC FEATURES

- 225MHz HDMI receiver

- Adaptive HDMI equalizer support for cables lengths up to 30M

- Support for customized EDID

- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames

- Full colorimetry support

- Support for 8/10/12
- bit color depths

- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

- Support for up to 2
- channel IEC60958 audio streams

- Support for extraction of audio formation information & channel status data

- Support for extraction of video timing information

- Support for extraction of 3D format information

- Support for Side
- by
- Side Half, Top
- and
- Bottom, Frame Packing 3D mode

SDI SPECIFIC FEATURES

- Integrated cable equalizer supporting cable lengths up to 230M for HD
- SDI signals

- Support for SD/HD/3Ga/3Gb/3Ga
- DL/3Gb
- DS standards

- Support for 2K (2048×1080) mode

- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

- Support for 10/12
- bit color depth

- Support for extraction of SMPTE 352 payload identifier

- Support for up to 8 (mono) audio channels at 48KHz

- Support for extraction of audio formation information & channel status data

- Limited support of 3Gb
- DS: only the first stream can be captured

- Limited support for capture of the first link of dual link interfaces:
* YCbCr 4:2:2 10
- bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
* YCbCr 4:4:4 10
- bit: captured as 4:2:2
* RGB 4:4:4: R/B sub
- sampled

YC & COMPOSITE SPECIFIC FEATURES

- 12
- bit ADC

- Support for NTSC, PAL, SECAM standards

- Auto detection of the standard of input signal

VIDEO CAPTURE FORMAT

- Support for capture resolutions up to 2048×2160

- Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency
- Typical capture frame rates on the Intel USB3.0 controller are as follows)
* 1920×1080 YUY2 (up to 75fps)
* 1920×1080 RGB24 (up to 60fps)

- Support for 4:2:2 8
- bit capture format: YUY2, UYVY

- Support for 4:4:4 8
- bit capture format: RGB24, RGB32

- The default capture format is YUY2. More capture formats can be set using USB Capture Utility

VIDEO PROCESSING FEATURES

- Video processing pipelines with 160 Mpixels/s processing bandwidth

- Video cropping

- Video scaling

- Video de
- interlacing
* Weave
* Blend top & bottom field
* Top field only
* Bottom field only

- Video aspect ratio conversion
* Auto or manual selection of input aspect ratio
* Auto or manual selection of capture aspect ratio
* Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

- Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of capture color format, quantization range & saturation range
* Support for RGB, YCbCr 601, YCbCr 709 color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range

- Video frame rate conversion

- Vertical flip and mirror

MULTIPLE DEVICES ON ONE COMPUTER

- Support for connecting multiple USB devices to one system

SDK

- The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

- Support for setting the device serial number as the device name shown in the system using USB Capture Utility

FIRMWARE UPGRADE

- Multiple devices in one system can be upgraded simultaneously

LED INDICATOR

- Status LEDs indicate the working state of each channel:
* Pulsing slowly: idle
* On: input signal locked
* Off: input signal unlocked
* Double blinks: memory failed or FPGA configuration failed

FORM FACTOR

- 98(L) × 98(W) × 25(H) mm

ACCESSORIES

- USB 3.0 cable

- DVI to VGA connector

- DVI
- I to HDMI + Component breakout

- DB9 to YC + Composite + Analog Audio + Component breakout

POWER CONSUMPTION

- 5V max current: 1 A

- max power consumption: 5 W

WORKING ENVIRONMENT

- Operating temperature: 0C to 45 deg C

- Storage temperature:
- 20C to 70 deg C

- Relative Humidity: 5% to 90% non
- condensing