Magewell USB Capture SDI Plus, USB3.0 DONGLE, 1-channel HD/3G/2K SDI with loop-through out, plus extra audio line in/out, Plug and Play, Windows/Linux/Mac (32050)

SUPPORTED OS

- Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)

- Linux (support x86, x64 & ARM architecture)
* Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
* CentOS 6.5/7 (x86 & x64)
* Fedora 25/26/27 (x86 & x64)
* Red hat 6.5 and above (x86 & x64)
* Other Linux OS with kernel version 2.6.35 and above

- Mac:
* OS X 10.9/10.10/10.11
* macOS 10.12/10.13

- Chrome OS

RECOMMENDED OS (TESTED)

- Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)

- Linux:
* Ubuntu 12.04/14.04/16.04 (x86 & x64)
* Ubuntu 17.04/17.10 (x64)
* CentOS 6.5/7.2 (x86 & x64)
* Fedora 25/26 (x64)
* Red hat 6.5 (x86 & x64)

- Mac:
* OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
* macOS 10.12/10.13.2/10.13.3

SUPPORTED APIs

- Windows:
* DirectShow
* Wave API/DirectSound/WASAPI

- Linux:
* V4L2
* ALSA

- OS X/macOS:
* QuickTime
* AV Foundation

SUPPORTED SOFTWARE

- VLC

- VirtualDub

- OBS

- XSplit

- vMix

- VidBlaster

- Wirecast

- Microsoft Media Encoder

- Adobe Flash Media Encoder

- Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software

INPUT INTERFACES

- BNC
* SD/HD/3G SDI
* 3.5mm audio jack
* unbalanced Line In interface

HOST INTERFACE

- USB 3.0
* compatible with USB 2.0
* compatible with USB 3.1 Gen 1

OUTPUT INTERFACE

- 3.5mm audio jack
* unbalanced Line Out interface

LOOP
- THROUGH INTERFACE

- BNC
* SD/HD/3G SDI

INPUT FEATURES

- Support for up to 2048×1080 input resolution

SDI SPECIFIC FEATURES

- Integrated cable equalizer supporting cable lengths up to 140M for 3G
- SDI signals

- Support for SD/HD/3Ga/3Gb/3Ga
- DL/3Gb
- DS standards

- Support for 2K (2048x1080) mode

- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

- Support for 10/12
- bit color depth

- Support for extraction of SMPTE 352 payload identifier

- Support for up to 2 (mono) audio channels at 48KHz

- Support for extraction of audio formation information & channel status data

- Limited support of 3Gb
- DS: only the first stream can be captured

- Limited support for capture of the first link of dual link interfaces:
* YCbCr 4:2:2 10
- bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
* YCbCr 4:4:4 10
- bit: captured as 4:2:2
* RGB 4:4:4: R/B sub
- sampled

ANALOG AUDIO FEATURES

- Extract the embedded SDI audio and output via 3.5mm unbalanced Line out

- Capture analog audio via 3.5 mm unbalanced Line In interface

VIDEO CAPTURE FORMAT

- Support for capture resolutions up to 2048x1080

- Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency
- Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
* 1920×1080 YUY2 (up to 70fps)
* 1920×1080 RGB24 (up to 60fps)

- Support for YUY2 & UYVY 4:2:2 8
- bit

- Support for RGB24 & RGB32 4:4:4 8
- bit

- The default capture format is YUY2. More capture formats can be set using USB Capture Utility

VIDEO PROCESSING FEATURES

- Video processing pipelines with 160 Mpixels/s processing bandwidth

- Video cropping

- Video scaling

- Video de
- interlacing
* Weave
* Blend top & bottom field
* Top field only
* Bottom field only

- Video aspect ratio conversion
* Auto or manual selection of input aspect ratio
* Auto or manual selection of capture aspect ratio
* Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

- Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of capture color format, quantization range & saturation range
* Support for RGB, YCbCr 601, YCbCr 709 color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range

- Video frame rate conversion

- Vertical flip and mirror

MULTIPLE DEVICES ON ONE COMPUTER

- Support for connecting multiple USB devices to one system

- Support for setting the device serial number as the device name shown in the system using USB Capture Utility

SDK

- The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

FIRMWARE UPGRADE

- Multiple devices in one system can be upgraded simultaneously

LED INDICATOR

- Status LEDs indicate the working state of each channel:
* Pulsing slowly: idle
* On: input signal locked
* Off: input signal unlocked
* Double blinks: memory failed or FPGA configuration failed

FORM FACTOR

- 110.7(L) × 56.8(W) × 17(H) mm

ACCESSORIES

- USB 3.0 cable

POWER CONSUMPTION

- 5V max current: 0.5 A

- max power consumption: 2.5 W

WORKING ENVIRONMENT

- Operating temperature: 0C to 50 deg C

- Storage temperature:
- 20C to 70 deg C

- Relative Humidity: 5% to 90% non
- condensing