Magewell Pro capture AIO, FH PCIe x1, 1-channel HD/3GSDI, HDMI/DVI/VGA/YPbPr/CVBS/S-Vid, plus one unbalanced stereo audio, Windows/Linux/Mac (11020)

SUPPORTED OS

- Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)

- Linux (support x86, x64 & ARM architecture):
* Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
* CentOS 6.5/7 (x86 & x64)
* Fedora 25/26/27 (x86 & x64)
* Red hat 6.5 and above (x86 & x64)
* Other Linux OS with kernel version 2.6.35 and above

- Mac:
* OS X 10.9/10.10/10.11
* macOS 10.12/10.13

RECOMMENDED OS (TESTED)

- Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)

- Linux:
* Ubuntu 12.04/14.04/16.04 (x86 & x64)
* Ubuntu 17.04/17.10 (x64)
* CentOS 6.5/7.2 (x86 & x64)
* Fedora 25/26 (x64)
* Red hat 6.5 (x86 & x64)

- Mac:
* OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
* macOS 10.12/10.13.2/10.13.3

SUPPORTED APIs

- Windows:
* DirectShow
* DirectKS
* Wave API/DirectSound/WASAPI

- Linux:
* V4L2
* ALSA

SUPPORTED SOFTWARE

- VLC

- VirtualDub

- OBS

- XSplit

- vMix

- VidBlaster

- Wirecast

- Microsoft Media Encoder

- Adobe Flash Media Encoder

- Any other DirectShow/V4L2 encoding/streaming software

INPUT INTERFACES

- DVI
- I
* DVI 1.0
* HDMI 1.4a (via breakout cable)
* VGA (via DVI2VGA connector)
* Component (via breakout cable)

- DB9
* YC (S
- Video)
* Composite video
* Analog audio (L+R)
* Component video

- BNC
* SD/HD/3G SDI

HOST INTERFACES

- PCIe Gen2 x1

INPUT FEATURES

- Auto scan of video input sources when there is no signal input to the currently selected input source

- Manual selection of video input source

- Auto selection of linked (embedded) audio input source when the video input source changes

- Manual selection of audio input source

- Support for standard crossbar based on video input source selection

- Support for input video resolutions up to 2048×2048 pixels

VGA & COMPONENT SPECIFIC FEATURES

- 12
- bit ADC

- Support for RGB & YCbCr (YUV) color formats

- Support for "Separated sync", "Composite sync", "Sync
- on
- green" (SOG), "Sync
- on
- luminance" (SOY)

- Support for DMT, CEA, CVT, GTF video timings

- Input signals up to 165MHz pixel rate are digitized with 1:1 sampling

- Input signals over 165MHz pixel rate can be digitized with horizontal sub
- sampling (resulting in some image quality loss
- NOT officially supported)

- Auto detection of RGB & YCbCr color formats

- Auto or manual sampling phase adjustment

- Auto horizontal alignment

- Support for customized video timings

- Support for customized video resolutions for CVT/GTF timings

HDMI SPECIFIC FEATURES

- 225MHz HDMI receiver

- Adaptive HDMI equalizer support for cables lengths up to 30M

- Support for customized EDID

- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames

- Full colorimetry support

- Support for 8/10/12
- bit color depths

- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

- Support for up to 8
- channel IEC60958/IEC61937 audio streams

- Support for extraction of audio formation information & channel status data

- Support for extraction of video timing information

- Support for extraction of 3D format information

- Support for extraction of Sony/Canon DSLR time code

- Support for Side
- by
- Side Half, Top
- and
- Bottom, Frame Packing 3D mode

SDI SPECIFIC FEATURES

- Integrated cable equalizer supporting cable lengths up to 230M for HD signals

- Support for SD/HD/3Ga/3Gb/3Ga
- DL/3Gb
- DS standards

- Support for 2K (2048x1080) mode

- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

- Support for 10/12
- bit color depth

- Support for extraction of SMPTE 352 payload identifier

- Support for up to 8 (mono) audio channels at 48KHz (channels 1–8 from the 16 available in the SDI spec)

- Support for extraction of audio formation information & channel status data

- Limited support of 3Gb
- DS: only the first stream can be captured

- Limited support for capture of the first link of dual link interfaces:
* YCbCr 4:2:2 10
- bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
* YCbCr 4:4:4 10
- bit: captured as 4:2:2
* RGB 4:4:4: R/B sub
- sampled

- Support for Closed Caption

YC & COMPOSITE SPECIFIC FEATURES

- 12
- bit ADC

- Support for NTSC, PAL and SECAM standards

- Auto detection of video input standard

VIDEO CAPTURE FORMATS

- Support for capture image resolutions up to 2048x2048 pixels

- Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth, and at higher image resolutions
- above
1280×1024
- by the pixel clock of the on
- board video processing hardware. eg. Max frame rate at 1920x1080 = ~80fps. )

- Support for 4:2:0 8
- bit capture formats: NV12, I420, YV12

- Support for 4:2:2 8
- bit capture formats: YUY2, YUYV, UYVY

- Support for 4:4:4 8
- bit capture formats: V308, IYU2, V408, BGR24, BGR32

- Support for 4:4:4 10
- bit capture formats: V410, Y410

- More capture formats are supported via Magewell Capture SDK for DirectKS

VIDEO PROCESSING FEATURES

- Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one

- Full 10
- bit video processing

- Video cropping

- Video scaling

- Video de
- interlacing
* Weave
* Blend top & bottom field
* Top field only
* Bottom field only

- Video aspect ratio conversion
* Auto or manual selection of input aspect ratio
* Auto or manual selection of capture aspect ratio
* Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

- Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of capture color format, quantization range & saturation range
* Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range

- Video frame rate conversion

- Video OSD composition
* Support for PNG OSD image (up to 2048x2048)
* Support for dynamic loading of RGBA OSD image via SDK

MULTIPLE CARDS PER SYSTEM

- Support for multiple cards plugged to one system

- On
- board rotary switch to set card number, with 16 positions from 0 to F

- System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on

- The video and audio device names displayed in your software will include the card number (set by the rotary switch)

MULTIPLE CAPTURE STREAMS

- Unlimited capture streams for any one input channel

- Independent cropping, aspect ratio, color format, resolution, frame rate, de
- interlacing and color adjustment settings for each individual stream

ULTRA LOW LATENCY SUPPORT

- Latency of 64 video lines

- Partial notification mode in SDK

TIMESTAMP & A/V SYNCHRONIZATION

- Hardware based 100ns high resolution clock

- Audio frames (192 audio samples) & video frames are stamped with hardware clock

- Hardware clock can be synchronized across cards (via SDK)

VIDEO CAPTURE SG
- DMA

- 400MB/s per channel DMA bandwidth in PCIe 2.x system

- 200MB/s per channel DMA bandwidth in PCIe 1.x system

- Support for auto detection of Intel tiled GPU surface

- Support for DirectGMA for AMD video adapter chipsets

- Support for GPUDirect for Nvidia video adapter chipsets

SDK

- Magewell Capture SDK for DirectShow for easy integration (Windows)

- Magewell Capture SDK for DirectKS for maximum flexibility & performance (Windows)

WINDOWS DRIVER TWEAKS

- All options can be controlled by three levels of registry key: global level, product level and device level

- Video, Audio, Crossbar filter names can be customized via registry keys

FIRMWARE UPGRADE

- Multiple cards in one system can be upgraded simultaneously

- Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)

- Safe upgrade

- If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version
* This function is only available for firmware version 1.21 and above

LED INDICATOR

- Status LEDs indicate the working state of each channel:
* Pulsing slowly: idle
* On: input signal locked
* Off: input signal unlocked
* Double blinks: memory failed or FPGA configuration failed

FORM FACTOR

- Normal profile PCIe x1 Add
- on Card
* 92.76×96.24 mm (without PCI bracket)

ACCESSORIES

- DVI to VGA connector

- DVI
- I to HDMI + Component breakout

- DB9 to YC + Composite + Analog Audio + Component breakout

POWER CONSUMPTION

- Max current at 12V: 0.39 A

- Max current at 3.3V: 0.2 A

- Max power consumption: 5.03 W

WORKING ENVIRONMENT

- Operating temperature: 0C to 40 deg C

- Storage temperature: –20C to 70 deg C

- Relative Humidity: 5% to 90% non
- condensing