Elsist UPS Mission 1000VA/900W, On-line double conversion, DSP, surge protection, LCD

- Single
- phase uninterruptible power supplies

- On
- line double conversion with DSP tecnology (Digital Signal Processor)

- MISSION UPS is equipped with a LCD display to shows all parameters (more than 50 items), and is possible to set the most basic configurations directly on LCD display

- MISSION is a compact UPS, and can be used for all kind of applications

- It is a true on
- line transformerless UPS, double conversion technology, single phase

- It includes a maintenance bypass (6KVA and 10KVA models), and it is possible to increase the back
- up time by adding battery packs

- MISSION is the most suitable product for critical loads

- It has 0 ms switching time and guarantee a perfect protection for all applications requiring an input voltage without disturbances and no interruptions

- A PF at 0.9 and DSP technology (Digital Signal Processor) it provides high output efficiency for all kind of loads

Features

- High input and output PF

- Wide input voltage range (energy saving)

- Eco Mode (Economic operation mode)

- Back feed protection and Surge Protection
- Auto self test

- Cold Start

- Parallel operation capability

- Output By
- pass

- Additional battery pack

- USB

- EPO

- Software included

- Intelligent Slot SNMP board (optional)
- Dry contact (optional)

Specifications

- Nominal Power: 1000 VA / 900 W

- Input: Single
- phase + GND

- Voltage Range:
* 115 +/
- 5VAC
* 295 +/
- 5VAC

- Frequency Range:
* 45Hz
- 55Hz@50HZ
* 55Hz
- 65Hz@60HZ

- Power Factor: =>0.98

- ECO interval: Output voltage +/
- 20 VAC

- Bypass range: 186 VAC
- 252 VAC

- THDi: <=7% (100% non linear load)

- Connection: 1× IEC

- Output: Single
- phase + GND

- Nominal Voltage: 208/220/230/240 VAC

- Power Factor: 0.9

- Voltage tolerance: +/
- 2%

- Frequency:
* Normal operation: When input frequency is within its range, then output frequency is the same than input; When input frequency is out of its range, then output frequency is (50/60 +/
- 0.2)Hz, which is the same as in battery mode
* Battery operation: (50/60 +/
- 0.2)Hz

- Crest Factor: 3:1

- Switching time: Rete
- battery = 0ms

- Overload:
* Battery operation:
** 108% +/
- 5% < load <= 150% +/
- 5% >30s output shutdown and signal
** 150% +/
- 5% < load < 200% +/
- 5% >300ms output shutdown and signal
* Normal operation:
** 108% +/
- 5% < load <=150% +/
- 5% >30s switch to bypass and signal
** 150% +/
- 5% < load <200% +/
- 5% >300ms switch to bypass and signal

- Efficiency:
* Normal operation: 100% of load =>88%
* Battery operation: 100% of load =>85%
* ECO: 100% of load =>94%

- Output voltage distortion:
* <= 3% (100% linear load)
* <= 5% (100% non linear load)

- Outlet type: 2× IEC, 1× Schuko

- Input battery voltage: 24 VDC

- Number of internal batteries: 2

- Type of battery: 12V/7AH battery maintenance
- free, sealed lead acid (referred to UPS standard only)

- Autonomy time: Full load =>4min (referred to UPS standard only), for long autonomy times models, the autonomy is defined by the battery capacity

- Recharge current: 1A

- Environmental conditions:
* Temperature: 0°C
- 40°C (battery excluded)
* Humidity: 0
- 95% whitout condensation
* Max Operating altitude: < 1500m; if >1500m, output power reduced

- Storage temperature:
- 25°C
- 55°C (battery excluded)

- Dimensions (W×D×H): 144×368×215 mm

- Weight: 9.7 kg