Cisco DX70 (White)

Feature Benefit Components Fully integrated unit including: ●Codec ●Camera ●Display ●Microphones and loudspeaker Included: Screen cleaning cloth, Ethernet cable (2.9m), and power supply Display ●14-inch LCD monitor ●Resolution: 1920 x 1080 (16:9) ●AHVA display technology contrast ratio: 700:1 (typical) ●Viewing angle: +/–178 degrees (typical) ●Response time: 25 ms ●Brightness: 300 cd/m2 (5 points average) ●10-point multi touch surface Supported PC input resolutions Up to 1080p Ergonomic design ●The stand is retractable in the upright position for easy transportation. ●You can tilt the screen from an angle of 5° to 70° from the vertical. ●You can tilt the camera from an angle of –5° to 70° from the display. ●The main I/O panel includes a flip cover to obscure connections. Audio ●Audio system playback: ◦Frequency range: 100 Hz to 15 kHz, +/–3 dB* ◦Maximum level: 90 dB at 1w/1m* ●The video conferencing system optimally tuned and located analog omni directional microphone. *Specification based on direct measurement of the acoustic sub-system Front camera ●63° horizontal field of view ●38° vertical field of view ●Resolution: 1080p30 ●F 2.2 ●Privacy shutter Processor TI OMAP 4470 1.5-GHz dual-core ARM Cortex-A9 processor Storage 8-GB eMMC NAND flash memory (embedded multimedia card; nonvolatile) Memory 2-GB RAM; Low Power Double Data Rate Synchronous Dynamic Random-Access Memory (LPDDR2 SDRAM) Ports and slots ●High-Definition Multimedia Interface (HDMI) type A port for PC or Mac video input ●HDMI type A port output (reserved for future use) ●High-speed USB 2.0 ports: ◦Three standard type A ports (for keyboard, mouse, headset, external camera, thumb drive, and memory stick connectivity) ◦Side-mounted USB port that provides high-current (2A) charging; the two rear-mounted ports each provide 500 mA charging ◦One Micro-B USB port (serial port for diagnostic and service use) ●Micro Secure Digital Standard Capacity (HDSC) slot for nonvolatile storage of applications or file expansion up to 32 GB (standard-definition [SD] card speed Class 4 or later recommended) ●One 3.5-mm analog headphone and headset jack Physical buttons ●Volume up/down ●Mute Visual indicator ●Cap-sense Audio Volume up/down ●Cap-sense Audio Mute ●Power/Reset/Sleep button Physical dimensions (H x W x D) 14.84 x 13.91 x 2.45 in. (377.1 x 353.1 x 62.3 mm) Weight 7.5 lb (3.4 kg) Power Rated: 3.5A at 12V maximum Low-power standby mode Physical security Compatible with Kensington Security Slot Connectivity Ethernet ●Internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC. ●The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic. Accessories Cisco VESA mounting kit This optional mounting kit includes an adapter that replaces the DX70 foot stand and provides mounting points in the two VESA standards (75 x 75 mm and 100 x 100 mm), allowing the use of third-party mounting solutions or the basic flush wall-mount included with the kit. Temperature Range Operating temperature ●32 to 104°F (0 to 40°C) Relative humidity ●10 to 90% (noncondensing) Storage temperature ●–4 to 140°F (–20 to +60°C) Approvals and Compliance ●Directive 2006/95/EC (Low-Voltage Directive) - Standard EN 60950-1 ●Directive 2004/108/EC (EMC Directive) - Standard EN 55022, Class B - Standard EN 55024 - Standard EN 61000-3-2/-3-3 ●Compliance with ETSI EN 301 489, ETSI EN 300 328, and ETSI EN 301 893 ●Directive 2011/65/EU (RoHS), Directive 2009/125/EC (ErP), and Directive 2002/96/EC (WEEE) ●Approved according to UL 60950-1 and CNA/CSA C22.2 No. 60950-1-07 ●Compliance with FCC CFR 47 Part 15 Class B ●Compliance with CFR 47 Part 15.247, CFR 47 Part 15.407, and 47 CFR Part 2.1093 FCC applicable KDBs Firmware Options and Features The Cisco DX70 and DX80, MX, and SX Series all support the Cisco Collaboration Endpoint (CE) Software. CE software is configurable for the Cisco Spark Service and for both Cisco HCS and on-premises deployments (registered to Cisco Unified Communications Manager, Cisco Video Communication Server, or even standalone with H.323). For the time being, the capabilities offered by these configurations do vary.Table 3describes the capabilities common to both.Table 4lists the additional on-premises features, andTable 5lists the major differences for the Cisco Spark Service. In addition, the DX Series can also run on Android-based software. This software is compatible only with Cisco Unified Communications Manager.Tables 6and7summarize the Android-based software. The DX70 and DX80 are planned to ship with CE software by default starting in the second half of 2016. Table 3.Features Common to the Cisco Spark Service and On-Premises Registered Endpoints Feature Cisco CE 8.2.0 Software for Managed and Hosted Video inputs Support for formats up to maximum 1920 x 1080 @ 30 fps (HD1080p30), including: ●●640 x 480 ●720 x 480 ●800 x 600 ●1024 x 768 ●1280 x 720 ●1366 x 768 ●1920 x 1080 High-definition inputs use progressive video formats. Extended Display Identification Data (EDID) Live video resolutions ●176 x 144 @ 30 fps (QCIF) (decode only) ●352 x 288 @ 30 fps (CIF) ●512 x 288 @ 30 fps (w288p) ●576 x 448 @ 30 fps (448p) ●768 x 448 @ 30 fps (w448p) ●704 x 576 @ 30 fps (4CIF) ●1024 x 576 @ 30 fps (w576p) ●640 x 480 @ 30 fps (VGA) ●800 x 600 @ 30 fps (SVGA) ●1024 x 768 @ 30 fps (XGA) ●1280 x 1024 @ 30 fps (SXGA) ●1280 x 720 @ 30 fps (720p30) ●1280 x 768 @ 30 fps (WXGA) ●1920 x 1080 @ 30 fps (1080p30) ●1440 x 900 @ 30 fps (WXGA+) ●1680 x 1050 @ 30 fps (WSXGA+) Audio features ●Up to 48-kHz sampling rate ●High-quality 20-kHz stereo audio ●Acoustic echo cancellers ●Automatic Gain Control (AGC) ●Automatic noise reduction Language support Arabic, Catalan, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese-Brazilian, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish; depends on software version. For regions that support Cisco Spark Service, please visit:cs.co/geos. Table 4.Software Features for Endpoints Registered On-Premises and Cisco HCS Feature Cisco CE 8.2.0 Software Bandwidth H.323 and SIP; up to 3 Mbps point to point Minimum bandwidth for resolution and frame rate 720p30 from 768 kbps 1080p30 from 1472 kbps Firewall traversal Cisco Tele Presence Expressway technology Video standards H.263, H.263+, H.264, and AVC (H.264/MPEG-4 Part 10 Advanced Video Coding) Video features ●On-screen layout control for video and presentation ●Active control (participants list, active speaker and content sharing, end participant call, and muted participants) ●Layout controls ●Self-View ●Far-end camera control Audio standards ●64- and 128-kbps AAC-LD, OPUS, G.722, G.722.1, G.711mu, G.711a, G.729ab, and G.729. Audio features ●Active lip synchronization Dual stream ●H.239 (H.323) dual stream ●Binary Floor Control Protocol (BFCP) (SIP) dual stream ●Support for resolutions up to 1080p (1920 x 1080) Multipoint support Cisco Ad-Hoc Conferencing (requires Cisco Unified Communications Manager, Cisco HCS, Cisco Tele Presence Server, and Cisco Tele Presence Conductor) Embedded encryption ●SIP point-to-point ●Standards-based: Advanced Encryption Standard (AES) ●Automatic key generation and exchange ●Support for dual stream Calling features ●+ Dialing (ITU E.164) ●Adjustable ringing and volume levels ●Adjustable display brightness ●Auto-answer ●Auto-detection of headset ●Call-history lists ●Caller ID ●Corporate directory ●Conference (ad hoc) ●Do Not Disturb (DND) ●Favorites ●Hold (and Resume) ●Join (ad hoc merge) ●Mute (audio and video) ●Network profiles (automatic) ●Self-View (video call) ●One-button-to-push (OBTP) IP network features ●Domain Name System (DNS) lookup for service configuration ●Differentiated Services (quality of service [QoS]) ●IP adaptive bandwidth management (including flow control) ●Dynamic play out and lip-sync buffering ●Date and Time support with Network Time Protocol (NTP) ●Packet loss-based down speeding ●URI Dialing ●TCP/IP ●Dynamic Host Configuration Protocol (DHCP) ●802.1x network authentication ●802.1Q virtual LAN ●802.1p (QoS and class of service [CoS]) ●Clear Path v1 and v2 Call control registration ●Native registration with Cisco Unified Communications Manager (requires Cisco Unified Communications Manager Version 8.6 or later) ●Basic Cisco Unified Communications Manager provisioning ●Firmware upgrade from Cisco Unified Communications Manager ●Cisco Discovery Protocol and DHCP option 150 support IPv6 network support ●Dual-stack IPv4 and IPv6 for DHCP, Secure Shell (SSH) Protocol, HTTP, Secure HTTP (HTTPS), DNS, and Differentiated Services (DiffServ) ●Support for both static and auto configuration (stateless address auto configuration) Security features ●Management through HTTPS and SSH ●IP administration password ●Menu administration password ●Disable IP services ●Network settings protection System management ●Support for the Cisco Tele Presence Management Suite (TMS) ●Total management through embedded Simple Network Management Protocol (SNMP), Telnet, SSH, XML, and Simple Object Access Protocol (SOAP) ●Remote software upload: Through web server, HTTP, and HTTPS Directory services ●Support for local directories (My Contacts) ●Corporate directory (through Cisco Unified Communications Manager and Cisco TMS) ●Server directory supporting Lightweight Directory Access Protocol (LDAP) and H.350 (requires Cisco Tele Presence Management Suite) ●Call history with received, placed, and missed calls with date and time Language support Arabic, Catalan, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese-Brazilian, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish; depends on software version When registered to the Cisco Spark Service, the DX70 and DX80 can call other endpoints including other Cisco room systems, tablets, PCs and Macs using URI dialing*. The services offered in this configuration are listed inTable 5. Also, if you have meetings with more than three parties, you can use the DX70 and DX80 with any meeting services such as Cisco Spark meetings or Cisco WebEx®on Annuity. Table 5.Software Features for the Cisco Spark Service or Cisco WebEx on Annuity Feature Cisco CE 8.2.0 Software for Cisco Spark Room System Calling into another audio or video device Video devices registered to a Cisco Spark system can call to any other Cisco Spark registered system as well as standards-based video and conferencing systems using URI dialing only. The Cisco Spark Service enables video conferencing with Skype for business. Bit rate and video quality Video calls will typically allow currently up to 720p30fps in a point-to-point call. In a multiparty call, a Cisco Spark system will send several independent streams and maintain a constant bit rate. In conditions where the network does not allow full bit rate, the rate will be automatically adjusted and the video gracefully degraded. Firewall traversal Cisco Spark meeting service does not require additional equipment for firewall traversal. Refer to this article for more information:https://support.ciscospark.com/customer/en/portal/articles/1911657-firewall-and-network-requirements-for-the-cisco-spark-app Video and audio standards Devices registered to Cisco Spark Service will typically use H.264 for video and OPUS for audio. Video features ●On-screen layout control for video and presentation ●Active control (participants list, active speaker and content sharing, and end participant call) ●Self-View Content sharing Up to 1080p5fps Pairing for room system control and moving calls When entering a room or area with a DX endpoint, both the DX and the Cisco Spark application visually indicate that they are paired or connected together. This pairing provides the following capabilities: ●Room system control: Use the Cisco Spark app on a mobile device to initiate, answer, or hang up a call on the Cisco Spark Room System. ●Move calls: Smoothly move a call from the Cisco Spark app on a mobile device to a Cisco DX when walking into the room. Or move a call from the Cisco DX to the Cisco Spark app when leaving the conference room. ●The Cisco Spark app on iOS and Android is enabled for pairing by default. Control is available to anyone with a Cisco Spark app, even the free version. Alternatively, users who do not have a mobile or desktop device or the Cisco Spark app can control the system with the DXs touch screen. *Note:When registered to Cisco Spark Service, the DXs do not have telephony capabilities, such as the ability to place or receive phone calls. They have URI dialing capabilities only. For more information about Cisco Spark Room Systems, visit the Cisco Sparkdata sheet. Table 6.Software Features for the Android-Based Software Feature Specifications Android core features ●Fully customizable Cisco Launcher and App Tray “Home Screen” enables you to place your own application shortcuts, widgets, and folders. ●Home Screen supports up to five separate screen views or pages with a 12 x 9 icon grid. ●Landscape-orientated applications are supported. ●On-screen keyboard is supported. Android bundled applications and widgets ●Calculator ●Calendar ●Camera ●Clock ●Contacts ●Direct dial ●Email ◦Internet Message Access Protocol (IMAP) ◦Post Office Protocol 3 (POP3) ◦Microsoft Exchange ActiveSync ●Favorites ●Gallery ●Phone features (for example, forward all, privacy, Do Not Disturb [DND], mobility, and Self-View) ●Wallpapers (including live wallpapers) ●Web browser Google bundled applications ●Google Play (enabled by administrator through Cisco Unified Communications Manager; includes country-approved Google mobile services applications) ●Gmail ●Google settings ●Maps ●Play Books ●Play Magazines ●Play Movies ●Play Music ●Google Now Cisco bundled applications ●Cisco AnyConnect®Secure Mobility Client (VPN) ●Cisco Jabber®Instant Messaging (which offers chat and presence capabilities) ●Cisco WebEx conferencing ●Quick Contact Badge (allows you to easily collaborate with your contacts to place a call, send an email message, send an instant message [IM], or start a WebEx®meeting) ●Visual Voicemail Cisco Intelligent Proximity for Mobile Voice ●Contact synchronization with Bluetooth-paired, Android, or iOS mobile device that supports Bluetooth Phone Book Access Profile (PBAP) ●Call-history synchronization to view placed or missed calls from mobile device on the DX80 ●Audio path routing, which sends audio through the DX80 for a mobile device-connected call Configuration modes ●Enhanced, fully functional mode that enables all aspects of the phone including applications and accounts ●Simple mode that hides applications and accounts and provides only voice and video call capabilities ●Public mode based on simple mode with restrictions on user settings modifications Application deployment options and management ●The administrator can disable downloading of all applications on the Cisco DX650, DX70, and DX80. Specifically, the administrator can configure the DX650, DX70, and DX80 to prohibit the installation of any third-party Android applications. ●Google Play access can be administratively disabled (default). Applications from “unknown sources” can be administratively disabled (default): ◦The administrator can optionally install applications using Cisco Unified Communications Manager with the APK file. ◦With Company Photo Directory (ability to set up and link photo directory URL image location associated with respective user), the administrator can set up and link a photo-directory URL image location associated with a respective user. Built-in training and setup assistance ●Setup Assistant wizard (helps configure email, Jabber®IM, WebEx conferencing, and voicemail account settings) Third-party application development Cisco Collaboration application programming interfaces (APIs) through a Software Developer Kit (SDK) https://developer.cisco.com/site/dxseries/overview/index.gsp Language support ●Arabic, Egypt (ar_EG) ●Bulgarian, Bulgaria (bg_BG) ●Catalan, Spain (ca_ES) ●Chinese, PRC (zh_CN) ●Chinese, Taiwan (zh_TW) ●Croatian, Croatia (hr_HR) ●Czech, Czech Republic (cs_CZ) ●Danish, Denmark (da_DK) ●Dutch, Netherlands (nl_NL) ●English, Britain (en_GB) ●English, United States (en_US) ●Finnish, Finland (fi_FI) ●French, France (fr_FR) ●German, Germany (de_DE) ●Greek, Greece (el_GR) ●Hebrew, Israel (he_IL) ●Hungarian, Hungary (hu_HU) ●Italian, Italy (it_IT) ●Japanese (ja_JP) ●Korean (ko_KR) ●Latvian, Latvia (lv_LV) ●Lithuanian, Lithuania (lt_LT) ●Norwegian bokmål, Norway (nb_NO) ●Polish (pl_PL) ●Portuguese, Brazil (pt_BR) ●Portuguese, Portugal (pt_PT) ●Romanian, Romania (ro_RO) ●Russian (ru_RU) ●Serbian, Republic of Serbia (sr_RS) ●Slovak, Slovakia (sk_SK) ●Slovenian, Slovenia (sl_SI) ●Spanish, Spain (es_ES) ●Swedish, Sweden (sv_SE) ●Thai, Thailand (th_TH) ●Turkish, Turkey (tr_TR) Calling feature support ●+ Dialing (ITU E.164) ●Abbreviated dialing ●Adjustable ringing and volume levels ●Adjustable display brightness ●Auto-answer ●Auto-detection of headset ●Barge (cBarge) ●Callback ●Call Chaperone ●Call forward ●Call forward notification ●Call-history lists ●Call park (including Directed Call Park and Assisted Directed Call Park) ●Call pickup ●Call timer ●Call waiting ●Caller ID ●Corporate directory ●Conference (ad hoc) ●Direct transfer ●Divert (iDivert) ●Do Not Disturb (DND) ●Cisco Extension Mobility service ●Fast-dial service ●Forced-access codes and client matter codes ●Group call pickup ●Hold (and Resume) ●Intercom ●International call logging ●Join (ad hoc) ●Last-number redial (LNR) ●Malicious-caller ID ●Message-waiting indicator (MWI) ●Meet-me conference ●Mobility (Cisco Mobile Connect and Mobile Voice Access) ●Music on hold (MoH) ●Mute (audio and video) ●Network profiles (automatic) ●On- and off-network distinctive ringing ●Personal directory ●PickUp ●Predialing before sending ●Privacy ●Private Line Automated Ringdown (PLAR) ●Ring tone per line appearance ●Self-View (video call) ●Service URL ●Shared line(s) ●Silent Monitoring and Recording ●Time and date display ●Transfer (ad hoc) ●Visual Voicemail ●Voicemail Emergency services Emergency Calling Service dialing Accessibility features Additional accessibility features for the vision impaired, blind, and the hearing and mobility impaired include user-defined and customizable: ●Display font size and screen brightness settings ●Touchscreen customizable touch and hold delay ●Talkback audio prompts and spoken password ●Support for Explore by Touch features Security Features Hardware ●Secure boot ●Secure credential storage ●Device authentication ●File authentication and encryption ●Image authentication and encryption ●Signaling authentication ●Random bit generation ●Hardware cryptographic acceleration ●Encrypted configuration files ●Encrypted file system Certificate management ●Certificate Authority Proxy Function (CAPF) support for additional security ●Manufacturer-Installed Certificates (MIC) ●Locally Significant Certificates (LSC) ●X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported Network ●Wired: 802.1x supplicant options for network authentication use: ◦Extensible Authentication Protocol: Extensible Authentication Protocol - Flexible Authentication via Secure Tunneling (EAP-FAST) ◦Extensible Authentication Protocol: EAP Transport Layer Security (EAP-TLS) ●Wireless (refer to Table 7): ◦Wi-Fi Protected Access 2 (WPA2) (EAP-FAST) ◦Wireless Equivalent Privacy (WEP) ◦Wireless EAP-TLS ●Protected Extensible Authentication Protocol - Generic Token Card (PEAP-GTC) Media and data signaling ●TLS ●Secure Real-Time Transport Protocol (SRTP) ●HTTPS for clients Enterprise access ●Cisco AnyConnect Secure Mobility Client ●Web Proxy (manual configuration or autoconfiguration of Protected Access Credential [PAC] files) ●NT LAN Manager (NTLM) and Kerberos authentication Device management ●Remote wipe ●ActiveSync remote wipe (email, contacts, calendar, etc.) ●Self-service wipe ●Wipe after unsuccessful login attempts ●Factory reset Policy management ●Password complexity ●Ability to disable USB ●Ability to disable speakerphone ●Ability to disable headset ●Secure digital I/O (SDIO) enable/disable ●Bluetooth ●Wi-Fi ●Access to Android market ●Screen lock and automatic lock (Personal Identification Number [PIN] or password) device ●Android Debug Bridge (ADB) Diagnostics ●The integrated Cisco Collaboration Problem Report Tool can send information directly to your system administrator when you experience problems with your phone or application (requires a configured email account). Table 7.Wi-Fi Features and Specifications for Android-Based Software Feature Specifications Protocol IEEE 802.11a, 802.11b, 802.11g, and 802.11n Frequency band and operating channels ●2.412–2.472 GHz (channels 1–13) ●5.180–5.240 GHz (channels 36–48) ●5.260–5.320 GHz (channels 52–64) ●5.500–5.700 GHz (channels 100–140) ●5.745–5.825 GHz (channels 149–165) Note:IEEE 802.11d is used to identify available channels. Nonoverlapping channels ●2.4 GHz (20-MHz channels): Up to 3 channels ●5 GHz (20-MHz channels): Up to 24 channels ●5 GHz (40-MHz channels): Up to 9 channels Operating modes ●Auto (default), preference to strongest RSSI for 2.4 or 5 GHz ●2.4 GHz only ●5 GHz only Data rates ●802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps ●802.11b: 1, 2, 5.5, and 11 Mbps ●802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps ●802.11n: HT MCS 0, MCS 1, MCS 2, MCS 3, MCS 4, MCS 5, MCS 6, and MCS 7 2.4-GHz receiver sensitivity IEEE 802.11b: ●1 Mbps: – 95 dBm ●2 Mbps: –93 dBm ●5.5 Mbps: –90 dBm ●11 Mbps: –86 dBm IEEE 802.11g: ●6 Mbps: –89 dBm ●9 Mbps: –89 dBm ●12 Mbps: –87 dBm ●18 Mbps: –85 dBm ●24 Mbps: –81 dBm ●36 Mbps: –78 dBm ●48 Mbps: –74 dBm ●54 Mbps: –72 dBm IEEE 802.11n HT20: ●MCS 0: –88 dBm ●MCS 1: –86 dBm ●MCS 2: –84 dBm ●MCS 3: –81 dBm ●MCS 4: –78 dBm ●MCS 5: –73 dBm ●MCS 6: –71 dBm ●MCS 7: –69 dBm 5-GHz receiver sensitivity IEEE 802.11a: ●6 Mbps: –91 dBm ●9 Mbps: –91 dBm ●12 Mbps: –90 dBm ●18 Mbps: –88 dBm ●24 Mbps: –85 dBm ●36 Mbps: –81 dBm ●48 Mbps: –77 dBm ●54 Mbps: –76 dBm IEEE 802.11n HT20: ●MCS 0: –91 dBm ●MCS 1: –89 dBm ●MCS 2: –86 dBm ●MCS 3: –84 dBm ●MCS 4: –81 dBm ●MCS 5: –76 dBm ●MCS 6: –74 dBm ●MCS 7: –72 dBm IEEE 802.11n HT40: ●MCS 0: –90 dBm ●MCS 1: –87 dBm ●MCS 2: –85 dBm ●MCS 3: –81 dBm ●MCS 4: –78 dBm ●MCS 5: –74 dBm ●MCS 6: –72 dBm ●MCS 7: –70 dBm Transmitter output power 2.4 GHz: ●802.11b: Up to 16 dBm ●802.11g: Up to 16 dBm ●802.11n HT20: Up to 15 dBm 5 GHz: ●802.11a: Up to 16 dBm ●802.11n HT20: Up to 15 dBm ●802.11n HT40: Up to 15 dBm Antenna ●2.4 GHz: 4.6 dBi peak gain ●5 GHz: 7.0 dBi peak gain Access-point support ●Cisco Unified Access Points ◦Minimum: 7.0.240.0 ◦Recommended: 7.4.121.0, 7.6.110.0, or later ●Cisco Autonomous Access Points ◦Minimum: 12.4(21a)JY ◦Recommended: 12.4(25d)JA2 or later Wireless security Authentication: ●Wi-Fi Protected Access (WPA) Versions 1 and 2 Personal and Enterprise ●EAP-FAST ●Protected Extensible Authentication Protocol - Microsoft Challenge Handshake Authentication Protocol Version 2 (PEAP-MSCHAPv2) ●Protected Extensible Authentication Protocol - Generic Token Card (PEAP-GTC) ●EAP-TLS Encryption: ●40- and 128-bit static Wired Equivalent Privacy (WEP) ●Temporal Key Integrity Protocol (TKIP) and Message Integrity Check (MIC) ●Advanced Encryption Standard (AES) Fast secure roaming Cisco Centralized Key Management (Cisco CKM) QoS ●IEEE 802.11e and Wi-Fi Multimedia (WMM) ●Enhanced Distributed Channel Access (EDCA) ●QoS Basic Service Set (QBSS) Radar detection Dynamic frequency selection (DFS) and transmit power control (TPC) according to IEEE 802.11h