Ubiquiti UniFi 5-Port full-managed Multi-Gigabit-Layer-2-Switch, PoE support, 4x 10 Gbit/s Ethernet, 1x Gigabit Ethernet (USW-Flex-XG)

- A compact, 5
- port, Layer 2 switch that supports 10 GbE speeds and can be powered with PoE or a 5V USB
- C adapter.


- (4) 10 GbE ports

- (1) GbE PoE+ input port for power


Mechanical

- Dimensions: 135 x 185 x 32 mm (5.3 x 7.3 x 1.3")

- Weight: 1.2 kg (2.7 lb)

- Enclosure material: Polycarbonate

Hardware

- Management interface. Ethernet In
- Band

- Networking interface
• (1) GbE, PoE+ RJ45 port
• (4) 10 GbE RJ45 ports

- Total non
- blocking throughput: 41 Gbps

- Switching capacity: 82 Gbps

- Forwarding rate: 61.012 Mpps

- Power method
• (1) PoE+, 50—57V DC, 25W
• (1) USB Type
- C, 5V DC, 5A

- Power supply:
• PoE+ (Pins 1, 2+/3, 6
- or 4, 5+/7, 8
- )
• AC/DC power adapter, 5V DC, 5A, 1.5 m cord (Included)

- Supported voltage range: 90—264V AC (Adapter)

- Max. power consumption: 25W

- ESD/EMP protection: Air: ± 16kV, contact: ± 12kV

- Button: Factory reset

- Ambient operating temperature:
- 5 to 45° C (23 to 113° F)

- Ambient operating humidity: 10 to 90% noncondensing

- Certifications: CE, FCC, IC

Switching Features

- Layer 2 features:
• IGMP snooping
• STP / RSTP with priorities and port
- level disable
• Port isolation
• Storm control
• Voice VLAN
• Port mirroring
• LACP port aggregation
• Multicast / broadcast rate limiting
• MAC address blocking
• Flow control
• 802.1X control
• Jumbo frames
• Proprietary loop protection
• DHCP snooping / guarding
• Egress rate limit
• LLDP
- MED
• Port restricted by MAC
• Device isolation with ACLs

LEDs

- System: Status

- Ethernet: Speed/link/activity

Application Requirements

- UniFi Network: Version 6.1.67 and later